
Add to Cart
3000w Home Wind Turbine System Combine With Solar Panel Use Roof Mounted Low Noise
Brief introduction:
A typical stand-alone system consists of a small wind turbine and solar panels to generate electricity connected to a charge controller which controls the pace at which batteries are recharged which is connected to the battery bank. You will then need an off-grid inverter to convert the DC electricity stored in the battery bank to AC electricity which is more commonly used in home & business appliances.
The benefit of wind solar hybrid off grid power system
3kw wind and solar hybrid system
Components | Model No. | Specification | Quantity |
Wind turbine | HY-1500L | 1500W wind turbine,5 blades | 1 |
Solar panel | HY-TLPV250 | 250W polysilicon solar modules | 6 |
Controller inverter | 1.5kw wind, 1.5kw solar, 1.5kw inverter output | 1 | |
Battery bank | 200AH/12V | 200AH/12V Gel battery | 4 |
Guyed tower | 9m | 9m guyed tower for 3kw wind turbine | 1 |
solar bracket | bracket for solar panel | 6 |
Controller inverter specification
Rated Output Power | 1.5kW |
Rated Battery Voltage | 48VDC |
Over Voltage Shutoff | 68VDC |
Over Voltage Recovery | 66VDC |
Under Voltage Shutoff | 43.2VDC |
Under Voltage Recovery | 48VDC |
No-load Loss | ≤0.4A |
Output Wave | Pure sine Wave |
Display Mode | LCD |
Cooling | Fan |
Rated Output Voltage | 220VAC |
Wave Distortion | ≤4% |
Output Frequency | 50±0.5Hz |
Dynamic Response | 5% |
Power Factor | ≥0.8 |
Over-load Capacity | 120% 1min,150% 10s |
Invert Efficiency | 90% Max |
Isolating Mode | Toroidal Transformer |
Noise (1m) | ≤40dB |
Insulating Strength | 1500VAC,1min |
Protection Functions |
Input over voltage protection, Battery under voltage protection, Battery anti-reverse connection protection, Output overload protection, Output short circuit protection, Over temperature protection. |
Ambient Temperature | -20~+55℃ |
Working Altitude | ≤4000m |
Ambient Humidity | 0~90%,Without Condensation |
In order to serve our customers better, our company can adjust parameter configuration according to customer’s requirement. |
FAQ
Q: How to know which system is suitable for my home?
A: Actually we can design the solution according to your power consumption, normally we need the following information:
1. Your home location, then we can check the wind and sun resource from internet
2. Your household appliance power capacity
3. Your home power consumption per month
4. Your public grid voltage and frequency