3000W 96V Off Grid Wind Solar Hybrid Controller Inverter As One For Residential

3000W 96V Off Grid Wind Solar Hybrid Controller Inverter As One For Residential

Technical Parameters

Installation Flow

Step 1. Check the package and then check the controller for damage after unpacking. Damaged inverter cannot be installed in the system.

Note: Wire connection diagram, please refer to Appendix.

Step 2. Make sure the “IVT SWITCH” in the position of “OFF”.

Step 3. Connect battery to “BATTERY” terminals with copper wire. Though the inverter has anti-reverse connection protection function, but wrong polarity of battery shall be forbidden! (Note: Copper wire diameter, please refer to Appendix I.)

Step 4. Connect load to “AC OUTPUT” socket or terminals.

Step 5. Turn on “IVT switch” if necessary and AC load works, the green “IVT” LED light will turn on. Then the inverters work and supply alternating current to the “AC OUTPUT”.

Step 6. If the inverter has the by-pass function, connect Utility grid to “AC INPUT” socket or terminals of the inverter. When battery is over discharge, the inverter will intelligently switch to utility grid and supply power for driving load.

Step 7. Check all the connections to be correct and firm.

Installation Warnings

Please strictly follow the installation notices as below.

• Battery reverse-connection is forbidden.
• Connection to Utility is forbidden, the inverter must be separately wiring.
• Battery virtual connection or damage is one main factor of malfunction. Please check battery voltage and connection status weekly, clear rust on positive, negative terminal in time; use lead terminal if available.
• If the apparatus alarms, should identify the reasons and repair before re-use. Immediate restarting shall be forbidden.
• In order to ensure the safe and normal work, the total power of load should not exceed the rated output capacity. If the load is inductive load, such as refrigerator, generator, washer, water pump, etc, user should use inverter capacity 5 ~ 6 times as load power and load should be switched on one by one. Do not switch them on frequently.
• If the malfunction is not easy to eliminate or reason unclear, please write down the phenomenon in detailed record, and contact manufacturer for help in time.

FAQ

1. Which payment terms are available?

A: Our company accept Telegraphic Transfer (T/T) payment for sample and bulk order.

2. I need the other accessories besides the wind turbine, do you also provide them?

A: Yes, we can supply not only the wind turbine but also the other parts of the system. E.g: controller, inverter.

3. Where is your factory?

A: Our factory locates at No. 10 Yongfa Avenue, Xinhua Street, Huadu District, Guangzhou, China.