1500W 48V Single Phase Wind Solar Hybrid Controller Inverter As One
Controller Installation Flow
Step 1. Check the package and then check the controller for damage
after unpacking. Damaged controller cannot be installed in the
Step 2. For controller whose dump load box is separated, please
connect dump load box to the “DUMP LOAD” terminals of the
Step 3. Connect battery positive pole to the positive (+) “BATTERY”
terminal, Connect battery negative pole to the negative (-)
“BATTERY” terminal with copper core cable.
(Note: Although the controller has anti-reverse connection
protection function, wrong polarity of battery shall be forbidden! Please refer to Appendix I for copper wire over current capability.)
Step 4. Connect the wind turbine output lines to the “WIND INPUT”
terminals in condition of wind turbine in action-less or low speed.
Step 5. Connect solar panels to the “SOLAR INPUT” terminals.
Step 6. Check all connection is proper and firm or not.
Step 7. If the controller has communication function, user can read
and set relevant parameters via software.
Step 8. User can set relevant parameters through LCD buttons.
Please strictly follow the installation notices as below.
1. The machine should be put indoor where is well-ventilated.
2. Avoid exposing the equipment under direct sunshine exposure,
rain, moist, acid mist and dust.
3. Allow at least 20 inches (0.5 m) distance from battery.
4. Ambient Temperature is -20～+55℃; Ambient Humidity is 35～85%RH,
5. If the equipment is used in the area of altitude higher than
1000m, output power should be lower 5% for usage accordingly with
every 1000m increasing.
6. Do not install the equipment in a compartment with flammable
liquids, such as gasoline, or explosive vapors. Be ware of the
flame and the spark.
|Rated Battery Voltage||48V|
|Rated Wind Turbine Input Power||1500W|
|Maximum Wind Turbine Input Power||2250W|
|Wind Turbine Brake Current||32A|
|Rated Solar Input Power||1500W|
|Floating Charging Voltage||58V|
|Ambient Temperature & Humidity||-20～+55℃/35～85%RH(Without Condensation)|
1. Which payment terms are available?
A: Our company accept Telegraphic Transfer (T/T) payment for sample
and bulk order.
2. Where can I buy the controller and inverter as one?
A: Please kindly send us the e-mail and we will arrange our sales
person to reply you.
3. I need the other accessories besides the wind turbine, do you
also provide them?
A: Yes, we can supply not only the wind turbine but also the other
parts of the system. E.g: controller, inverter.
4. How long will I receive my goods?
A: Our cooperated express shipping agent is FedEx. Customer will
receive the goods within 3-7 days from the date we sent out.
As for ocean shipping, it takes 1-2 months for most of country. But
it is the cost effective way to arrange the over length cargo, such