1.5KW Horizontal Wind Turbine Rooftop Mounting Of 3Phase AC
With over 16 years experience in production and application of wind
& solar hybrid power system, HY Energy has developed over 20
different application fields of wind and wind solar hybrid system
such as residential grid-tie power system, residential off-grid
power system, stand-alone wind solar hybrid street lighting, wind
solar hybrid powered telecom tower, wind solar hybrid powered
monitoring system etc.
Most of these applications have been widely applied around the
world and enjoyed a good reputation by its system quality,
reliability and professional pre-sales and after-sales service of
HYE team. Furthermore, all components of each system solutions are
either developed by HY Energy or customized and optimized by
supporting vendor according to HYE wind turbine special features or
some specific project, this could maximize the system power
production and also improves reliability and compatibility of the
system. Our engineering team could provide whole system design and
full construction support base on your specific requirements. We
believe soon you will benefit from our professionalism.
2. HY-1500 wind turbine special feature - Over-speed Control System
This power curve generated by wind tunnel testing indicated that
the blade aerodynamics braking system starts to take effect from
14-15m/s wind speed, the rotor RPM is always limited within wind
turbine rated maximum RPM at even higher wind.
Abandoned the traditional failure-prone mechanical furling system,
the blade itself is designed with over-speed braking system which
will generate a reverse reluctant torque to lower the blade
rotation speed so that the blades and generator can be well
protected in higher wind, it solved safety and reliability problems
facing by most small wind turbines.
Combination of Electromagnetic braking and aerodynamic braking
maximizes energy capture by extending turbine’s operating speed
range into higher and lower wind speed which are missed by the old
style wind turbines.
3. Tower Installation:
An ideal location for wind generator is required with stable speed
and direction of prevailing wind. Small changes in wind speed and
direction can have a dramatic effect on power production. In
general, the higher the tower, the greater the wind speed and
ultimately power production are. Therefore, the site of your wind
turbine should be carefully considered. Each installation is
different and is often compromised among the tower height, distance
from the battery bank, local zoning requirements and obstacles such
as buildings and trees. Following requirements should be followed:
- The minimum recommended tower height is 20 ft (6 m) on open ground
or 20 ft (6 m) above nearby obstructions；
- Try to locate the wind turbine in the “cleanest” turbulent free air
as possible. Turbulence will reduce the efficiency of wind turbine
and may accelerate wear on rotating components.
- Try to locate the turbine without obstacles within 200m of
- The installation distance between two turbines should be 8-10 times
of the rotor diameter.
- Installation site should be complied with local regulations.